Integrated strainer to protect the valve.
Pneumatically operated level sensed condensate drain
The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the HLD condensate drains orifice can be 6 mm, offering an increased reliability factor.
The HLD condensate drains is ideally suited in applications where power is not available, too expensive or not reliable. The HLD drains features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.
In addition, the HLD condensate drains can be applied in applications that demand a higher IP rating (International Protection rating or Ingress Protection). The HLD condensate drains offers an IP68/NEMA6 rating.
The HLD condensate drains removes condensate from compressed air systems without using electricity and without the unnecessary loss of compressed air.
Test feature for routine testing.
Robust aluminium housing with three inlet options, offering you installation flexibility.
- Competitive ‘true green’ solution.
- No operating costs.
- No electricity required - install and go!
- Operating pressure up to 16 bar.
- Reduced stocking costs - 1 model covers 100 m³/min.
- Suitable for any type of compressed air system.
- No complicated sizing charts required.
- Compact and unique design.
- Successful draining of condensate due to large orifice (also heavily emulsified condensate).
- Incredibly easy and quick to install and to service.
- No complicated control air line and pressure regulator required.
- Integrated strainer.
- Top and side inlets available.
- Test feature.
- Robust aluminium housing.
- Direct acting valve construction for a reliable condensate discharge operation.
| 100 m³/min. (3500 CFM) |
| 1062 liters condensate per hour at 16 bar |
| 3 - 16 bar (44 - 230 psi) |
| 1 - 50 °C (34 - 122 °F) |
| 1 - 50 °C (34 - 122 °F) |
| IP68 (NEMA6) |
| 1/2″ BSP or NPT, 3 inlet options |
| 12 cm (top) and 9.7 & 1.5 cm (side) |
| 1/4″ BSP, with brass hose barb adapter |
| Direct acting |
| 6 mm |
| FPM |
| Yes |
| Yes |
| Corrosion resistant aluminium, EP coating |
| Yes |
REACH OUT TO US
We're here to help. Please choose one of the options below to get in touch with us!