Back to the product list

CBA Series - CATALITE Breathing Air Purifiers

AIR & GAS TREATMENT / BREATHING AIR PURIFIERS

Maintain Health & Safety in the Workplace!

 
Contact Us
Request a Quote Request Service, Parts or Support
Share

Features

Features

Taking Your Workers from Hazard to Health

The Catalite@ Breathing Air Series Purifiers encompass Hankison's premium performance technology in order to provide the clean, dry air necessary to keep your workers safe. The CBA Series is designed to be used as an addition to your plant air source to convert compressed air to breathable air for those processes identified as hazardous.

Hankison's Catalite@ breathing air purifiers have been engineered to handle flow capacities from 15 to 940 scfm (25 to 1597 nm3/h) and remove contaminants in six stages of filtration in order to meet OSHA, CGA, ANSI, and CSA breathing air standards. At the core of the process is a heatless regenerative desiccant dryer with a fixed 10 minute dryer cycle delivering consistent ISO 8573-1: 2010 Class 2 (-40°F, -40°C) outlet pressure dew point quality air. Offering advanced controls and analyzers the Catalite® Breathing Air Purifier is the complete solution for your breathing air treatment processes.

This is equipment is intended for industrial applications only. Consult factory for non-industrial applications.

Key Applications

Key Applications

Application Compressed Breathing Air Use

Power Generation

Furnaces, boilers and holding tank workers use breathing air to guard against contaminated atmospheric conditions

Petrochemical Manufacturing

Protects workers from hazardous fumes, gases and vapors.

Construction

Workers require PPE for protection when working in asbestos abatement environments.

Sandblasting/Spray Painting

Protects workers from atomized VOC's emitted during this application process.

General Industrial

Confined spaces present hazardous breathing conditions when working in areas with poor air circulation, such as tanks, vats and boilers.

Specifications

Specifications

Model No. Inlet
Flow1		 Outlet
Flow1		 Voltages In/Out
Connections
SCFM NM3/H SCFM NM3/H V/PH/HZ IN
CBA15 18 31 15 26 85-264/1/
47-63 AC
11.5-28 V DC		 1 NPT
CBA25 30 51 25 42 1 NPT
CBA35 42 71 35 59 1 NPT
CBA50 60 102 50 85 1 NPT
CBA75 90 153 75 127 1 NPT
CBA95 114 194 95 161 1 NPT
CBA135 162 275 135 229 1 NPT
CBA205 246 418 205 348 1.5 NPT
CBA305 366 622 305 518 2 NPT
CBA375 450 765 375 637 2 NPT
CBA490 590 1002 490 833 2 NPT
CBA625 750 1274 625 1062 2 NPT
CBA775 930 1580 775 1317 3 FLG
CBA940 1130 1920 940 1597 3 FLG

1 Flow capacity rated at CAGI conditions: 100 psig (7.0 bar) and 100ºF (38ºC) saturated inlet

Dimensions

CBA 15

MODEL  DIMENSIONS WEIGHT
H W D
IN MM IN MM IN MM LBS KG
CBA 15 49 1,244 42 1,067 35 889 440 200

CBA 25

MODEL  DIMENSIONS WEIGHT
H W D
IN MM IN MM IN MM LBS KG
CBA 25 49 1,244 42 1,067 35 889 450 204

CBA 35

MODEL  DIMENSIONS WEIGHT
H W D
IN MM IN MM IN MM LBS KG
CBA 35 49 1,244 42 1,067 35 889 455 206

CBA 50

CBA 75

CBA 95

CBA 135

CBA 205

CBA 305

CBA 375

CBA 490

CBA 625

CBA 775

CBA 940

Performance

Performance

Purification Capabilities

Contaminants
mg/m3		 Maximum Allowable Concentration
OSHA1 CSA		 Power Outlet Rated Conditions

Carbon Monoxide(CO)

10

5

95% Conversion5

Carbon Dioxide(CO2)

1000

500

2

Oil(Condensed Hydrocarbons)

5

1

0

Oil Vapor(Gaseous Hydrocarbons)

____

____

< 0.023

Odor

Lack of noticeable odor

_4

1 OSHA Standard references CGA (Compressed Gas Association) pamphlet G-7.1, Grade D and is generally consistent with those published by ANSI
2 CO is converted to CO2 by the purifier and added to the concentration of CO2 already present (normal atmospheric air contains 314 mg/m3 of CO2 ) Although some CO2 is absorbed in the desiccant beds, high concentrations of CO in the system and/or high concentrations of CO2 at the compressor intake could result in exceeding allowable CO2 limits
3 Will remove only those gaseous hydrocarbons normally adsorbed by activated carbon. Outlet concentration is expressed as methane equivalent, Activated carbon will not remove methane
4 Will remove only those odors normally adsorbed by activated carbon
5 95% Conversion example (200 mg/m3 @ inlet = 10 mg/m3 @ outlet)

Parts

Parts

REPLACEMENT FILTER ELEMENTS

Model No. Prefilters Catalyst Afterfilters
PF UF Cartridge PF CF
CBA15 F02-PF-DG1 F02-UF-DG1 CC0 F02-PF-TG1 F02-CF-T
CBA25 F03-PF-DG1 F03-UF-DG1 CC0 F03-PF-TG1 F03-CF-T
CBA35 F04-PF-DG1 F04-UF-DG1 CC0 F04-PF-TG1 F04-CF-T
CBA50 F06-PF-DG1 F06-UF-DG1 CC1 F06-PF-TG1 F06-CF-T
CBA75 F07-PF-DG1 F07-UF-DG1 CC1 F07-PF-TG1 F07-CF-T
CBA95 F08-PF-DG1 F08-UF-DG1 CC2 F08-PF-TG1 F08-CF-T
CBA135 F10-PF-DG1 F10-UF-DG1 CC2 F10-PF-TG1 F10-CF-T
CBA205 F10-PF-DG1 F10-UF-DG1 CC3 F10-PF-TG1 F10-CF-T
CBA305 F12-PF-DG1 F12-UF-DG1 CC4 F12-PF-TG1 F12-CF-T
CBA375 F13-PF-DG1 F13-UF-DG1 CC5 F13-PF-TG1 F13-CF-T
CBA490 F14-PF-Z2G1 F14-UF-Z2G1 CC6 F14-PF-G1 F14-CF
CBA625 F14-PF-Z2G1 F14-UF-Z2G1 CC7 F14-PF-G1 F14-CF
CBA775 F15-PF-Z2G1 F15-UF-Z2G1 CC8 F15-PF-G1 F15-CF
CBA940 F16-PF-Z3G1 F16-UF-Z2G1 CC9 F16-PF-G1 F16-CF

Accessories

Accessories

CO Monitor Base Model

  • Can be used as a stand-alone device
  • 0-200 ppm carbon monoxide range
  • Designed for simple, trouble-free use and maintenance
  • Easy-to-calibrate monitor features:
    • Digital display
    • Two adjustable alarm set points
    • Audible alarm with a silence switch
  • NEMA 4 enclosure
  • Alarm push-to-test switch
  • The sensor is easily replaceable, will not leak and is unaffected by most background gases.
  • Comes ready to use-no assembly required.

Advanced Breathing Air Analyzer with Alarms

  • CO & Oxygen Monitor
  • CO & Dewpoint Monitor
  • CO Oxygen Dewpoint Monitor

Downloads